AFTF-ECATP LCD

S+S Regeltechnik

벽걸이형 온습도 센서

제품 설명

  • 0…100% 상대습도
    -35…+80°C
  • 온도[°C], 상대습도[%RH],
    이슬점[°C], 절대습도[g/m3 ] ,
    혼합비[g/kg], 엔탈피[kJ/kg]
  • 이더캣 P
  • IP 54
HYGRASGARD® 네트워크형 실외 습도 및 온도 트랜스미터 AFTF-EtherCATP (M8 커넥터, EtherCATP 코딩), Bluetooth 지원, 퀵 릴리스 나사가 있는 내충격성 플라스틱 하우징, 디스플레이 및 막대 그래프 유무 선택 가능, 플라스틱 소결 필터(교체 가능) 포함.

이 센서는 다양한 습도 측정 기술 매개변수를 결정하는 데 사용됩니다. 다음은 측정된 상대 습도 (0~100% RH) 및 주변 공기 온도 (-35~+80°C)입니다. 추가 출력 변수는 이러한 측정 변수에서 내부적으로 계산됩니다. 절대 습도 (0~80g/m³), 혼합 비율 (0~80g/kg), 이슬점 온도 (-20~+80°C) 및 엔탈피 (0~85kJ/kg), 대기압 무시. 장기적으로 안정적인 디지털 센서는 정확한 측정 결과를 보장합니다. 센서는 공장에서 교정됩니다. 최고의 신뢰성을 갖춘 산업 요건을 충족하는

EtherCAT P 지원 측정 트랜스듀서입니다 . 장치의 ESI 구성 파일을 통해 PLC 레벨에 간편하게 통합할 수 있으며, 진단 옵션(예: 통신 오류 카운터), 확장된 설정 옵션, 검색 가능한 이력 데이터(최소/최대) 및 센서 유지보수 간격 결정 기능을 제공합니다. 대형 조명 디스플레이(3줄, 7세그먼트 및 도트 매트릭스 영역에서 개별 프로그래밍 가능)와 그래픽 표현을 위한 막대 그래프(7자리, LED는 자유롭게 설정 가능)를 옵션으로 제공합니다(예: 신호등 디스플레이).

Product description

  • 0…100 % RH
    -35…+80 °C
  • Temperature [°C], relative humidity [% RH],
    dew point [°C], absolute humidity [g / m3],
    Mixing ratio [g / kg], enthalpy [kJ / kg]
  • EtherCAT P
  • IP 54
HYGRASGARD® networkable outdoor humidity and temperature transmitter AFTF – EtherCATP with M8 connectors (EtherCATP-coded), Bluetooth-capable, in an impact-resistant plastic housing with quick-release screws, optionally with/without display and bar graph, with plastic sintered filter (replaceable).

The sensor is used to determine various humidity measurement technology parameters. The following are measured relative humidity (0…100 % RH) and the temperature (- 35…+80 °C) of the ambient air. Further output variables are calculated internally from these measured variables: absolute humidity (0…80 g/m³), mixing ratio (0…80 g/kg), Dew point temperature (- 20…+80 °C) and enthalpy (0…85 kJ/kg), disregarding atmospheric pressure. A long-term stable, digital sensor guarantees exact measurement results. The sensor is calibrated at the factory.

EtherCAT P-capable measuring transducer for industrial requirements with maximum reliability: simple integration into the PLC level via the ESI configuration file of the device, diagnostic options (such as communication error counter), extended setting options, retrievable historical data (min/max) and maintenance interval determination of the sensor. Optionally with large illuminated display (three lines, individually programmable in the 7-segment and dot-matrix area) and bargraph (seven digits, LEDs freely configurable) for graphical representation, e.g. as a traffic light display.
Share the Post:
위로 스크롤