AFTM-CO2-Modbus

S+S Regeltechnik

다측정 센서

제품 설명

  • 0…5000ppm
  • 온도, 상대 습도, 이산화탄소(CO2), 대기압
  • 전환 가능한 미터법/영국식 단위
  • 모드버스 RTU
  • IP 65
유지 보수가 필요 없는 표면 장착 센서 AER ASGARD® AFTM – LQ- CO2 – Modbus (최대 확장 단계) 또는 Modbus 연결이 있는 AFTM – CO2 – Modbus , 자동 보정, 빠른 잠금 나사가 있는 충격 방지 플라스틱 하우징, 플라스틱 소결 필터(교체 가능), 선택적으로 디스플레이 포함/미포함, 공기의 CO2 함량(0…5000ppm), 공기 질 또는 공기 품질(0…100% VOC), 온도(-35…+80°C) 및 상대 습도(0…100% RH)를 측정합니다. 국제 단위계 SI (기본값)는 영국식 (Modbus를 통해)으로 설정됩니다.

다음 매개변수는 Modbus를 통해 불러올 수 있습니다. 온도, 상대 습도, 공기 질(VOC), 이산화탄소(CO2) 및 대기압. 이 센서는 사무실, 호텔, 회의실, 아파트, 매장 등에서 사용되며 실내 기후를 평가하는 데 사용됩니다. 이를 통해 에너지 절약형, 필요 기반 실내 환기가 가능해져 운영 비용이 절감되고 웰빙이 향상됩니다. 실내 면적 30m²당 센서 1개를 권장합니다.


장기 안정성을 갖춘 디지털 습도 및 온도 센서는 정확한 측정 결과를 보장합니다.CO2 측정은 광학 NDIR 센서 (비분산 적외선 기술)를 사용하여 수행됩니다.감지 범위는 주거 및 회의실 모니터링과 같은 표준 응용 분야에 맞게 보정되었습니다.공기 질은 VOC 센서 (휘발성 유기 물질용 혼합 가스 센서)를 사용하여 측정합니다.이 센서는 담배 연기, 체액 증기, 호흡 공기, 용매 증기, 배출물 등과 같은 오염된 가스에 의한 실내 공기 오염을 판별합니다.예상되는 공기 오염에 대해 낮음, 중간 또는 높음 VOC 감도를 설정할 수 있습니다. 전기적으로 절연된 RS485
Modbus 인터페이스, 전환 가능한 버스 종단 저항, 전원이 꺼진 상태에서 버스 매개변수 및 버스 주소를 설정하기 위한 DIP 스위치, 텔레그램 상태 표시를 위한 내부 LED, 두 개의 별도 푸시인 단자 및 대형 3줄 디스플레이(조명, 7세그먼트 범위 및 도트 매트릭스 범위에서 개별적으로 프로그래밍 가능)를 갖춘 혁신적인 Modbus 센서입니다.센서는 공장에서 보정됩니다. 환경에 따라 전문가의 미세조정이 가능합니다.

Product description

  • 0…5000 ppm
  • Temperature, relative humidity, carbon dioxide (CO2), atmospheric air pressure
  • switchable metric / imperial
  • Modbus RTU
  • IP 65
Maintenance-free surface-mounted sensor AERASGARD® AFTM – LQ- CO2 – Modbus (max. expansion stage) or AFTM – CO2 – Modbus with Modbus connection, automatic calibration, in an impact-resistant plastic housing with quick-locking screws, plastic sintered filter (replaceable), optionally with/without display, for determining the CO2 content of the air (0…5000 ppm), the air quality or air quality (0…100 % VOC), the temperature (-35…+80 °C) and the relative humidity (0…100 % RH). International unit system SI (default) is set to Imperial (via Modbus).

The following parameters can be called up via Modbus: Temperature, relative humidity, air quality (VOC), carbon dioxide (CO2) and atmospheric air pressure. The sensor is used in offices, hotels, conference rooms, apartments, stores, etc. and is used to evaluate the indoor climate. This enables energy-saving, needs-based room ventilation and thus a reduction in operating costs and an increase in well-being. One sensor per 30 m² of room area is recommended.


One with long-term stability, digital humidity and temperature sensor guarantees exact measurement results. The CO2 measurement is carried out using an optical NDIR sensor (non-dispersive infrared technology). The detection range is calibrated for standard applications such as residential and conference room monitoring. The air quality is measured using VOC sensor (mixed gas sensor for volatile organic substances). This determines the pollution of the room air by contaminated gases such as cigarette smoke, body vapors, breathing air, solvent vapors, emissions, etc. A low, medium or high VOC sensitivity can be set for the expected air contamination.
Innovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.

위로 스크롤