제품 설명
- 0.1…20m/s
- 흐름 속도
- 0-10V
- 전원 공급 장치: 24V AC / DC
- IP 65(EN 60529에 따름), 센서 IP 20
- 설치 길이: 120mm
전자식 덕트 공기 유량 센서 RHE ASGARD® KLGF (활성 출력, 내충격성 플라스틱 하우징, 퀵 릴리스 나사, 케이블 글랜드 포함(DIN EN 61076-2-101에 따른 M12 플러그 커넥터 옵션), 디스플레이 없음(옵션), 유속(0.1~20m/s) 측정용. 측정 변환기는 측정 신호를 0~10V의 표준 신호로 변환합니다 .
전자식 덕트 공기 유량 모니터 RHE ASREG® KLSW (스위칭 출력, 내충격성 플라스틱 하우징, 퀵 잠금 나사, 케이블 글랜드 포함), 디스플레이 없음(옵션), 유속(0.1~20m/s) 측정용.
이 유량 센서는 덕트, 팬, 제어 댐퍼의 공기 유량을 모니터링 또는 제어하는 데 적합하며, DIN 57100 Part 420에 따라 가습기 및 전기 난방 레지스터의 유량 의존적 모니터링을 수행하거나 DDC 시스템과 함께 사용할 수 있습니다.
전자식 덕트 공기 유량 모니터 RHE ASREG® KLSW (스위칭 출력, 내충격성 플라스틱 하우징, 퀵 잠금 나사, 케이블 글랜드 포함), 디스플레이 없음(옵션), 유속(0.1~20m/s) 측정용.
이 유량 센서는 덕트, 팬, 제어 댐퍼의 공기 유량을 모니터링 또는 제어하는 데 적합하며, DIN 57100 Part 420에 따라 가습기 및 전기 난방 레지스터의 유량 의존적 모니터링을 수행하거나 DDC 시스템과 함께 사용할 수 있습니다.
Product description
- 0.1…20 m/s
- Flow velocity
- 0-10 V
- Power supply: 24 V AC / DC
- IP 65 (according to EN 60529), sensors IP 20
- Installation length: 120 mm
Electronic duct airflow sensor RHEASGARD® KLGF with active output, housing made of impact-resistant plastic with quick-release screws, with cable gland (optional M12 plug connector to DIN EN 61076-2-101) optionally with ⁄ without display, for determining the flow velocity (0.1…20 m/s). The measuring transducer converts the measuring signal into a standard signal of 0 – 10 V.
Electronic duct air flow monitor RHEASREG® KLSW with switching output, housing made of impact-resistant plastic with quick-locking screws, with cable gland, optionally with ⁄ without display, for determining the flow velocity (0.1…20 m/s).
The flow sensors are suitable for monitoring or controlling air flows in ducts, on fans, control dampers, for flow-dependent monitoring of humidifiers and electric heating registers in accordance with DIN 57100 Part 420 or for use in conjunction with DDC systems.
Electronic duct air flow monitor RHEASREG® KLSW with switching output, housing made of impact-resistant plastic with quick-locking screws, with cable gland, optionally with ⁄ without display, for determining the flow velocity (0.1…20 m/s).
The flow sensors are suitable for monitoring or controlling air flows in ducts, on fans, control dampers, for flow-dependent monitoring of humidifiers and electric heating registers in accordance with DIN 57100 Part 420 or for use in conjunction with DDC systems.



