제품 설명
- 80mA와 15mA의 두 가지 전력 모델로 제공됩니다.
- 모든 모델에 산업용 Ex d IIC 인증, 광산용 M1 인증이 제공됩니다.
- 모든 모델에 SIL1 인증이 제공됩니다.
- 모든 센서는 5년 보증이 적용됩니다.
- 0~100% 용량의 메탄을 측정하며, 0~5% 용량은 0.01%, 5~100% 용량은 0.1%의 분해능을 제공합니다.
- 다양한 가스 범위를 통해 0~100% 용량의 메탄, 0~2% 용량의 프로판, 0~100% 용량을 정확하게 감지할 수 있습니다. 단일 센서로 이산화탄소 측정
- 0~5% 부피의 이산화탄소를 0.01% 분해능으로 측정하며, 5~100% 부피에서는 0.1% 분해능으로 측정합니다.
- 바이오가스 측정 전용 구성 가능
- 이전 버전 대비 응답 시간 단축
- USB 전원 공급 방식의 Premier Configuration Unit을 사용하여 사용자 설정 가능
- 출력은 % 부피 또는 % LEL 단위로 조정 가능
- 내부 플래시 메모리를 통해 구성 장치를 통해 센서 펌웨어 업데이트 가능
- 강화된 EMC 보호 기능
- 적외선 NDIR 센서
당사의 듀얼 가스 메탄(CH4)/이산화탄소(CO2) 센서는 단일 센서 패키지로 메탄과 이산화탄소를 동시에 측정하는 혁신적인 장치입니다. 단일 적외선 센서의 전력만 소모하면서 이러한 성능을 제공합니다. 또한, 이 센서는 0~2% 프로판 측정 범위를 미리 설정하여 기본으로 제공한다는 추가적인 이점을 제공합니다.
이 센서는 적외선 가스 감지 기술을 사용하여 가스 농도를 정확하게 측정합니다. 최대 100% 메탄과 5% 이산화탄소 측정 범위를 조합한 다양한 버전이 제공됩니다. 단일 적외선 센서의 전력만 소모하므로 휴대용 가스 감지기에 사용할 경우 배터리 수명이 연장됩니다.
탄화수소 채널은 고분해능 메탄과 프로판을 동시에 측정합니다.
탄화수소 채널 분해능 – 0~10% 부피 범위에서 0.01%, 10~100% 부피 범위에서 0.1% (CH4)
이산화탄소 채널 분해능 – 0.01% 부피 (CO2)
이 센서는 ‘플래티넘’ 시리즈에 속하며, 산업용 Ex d IIC 인증, 광산용 M1 인증 및 비인증 버전으로 제공됩니다. 또한 UL 승인을 받았습니다.
저전력 및 EN50271/SIL1 인증 소프트웨어 버전도 모든 조합으로 제공됩니다.
‘프리미어’ 가스 센서 구성 장치는 ‘플래티넘’ 시리즈 센서와 함께 사용할 수 있습니다. 사용자 정의 매개변수, 데이터 로깅 및 교정을 맞춤 설정할 수 있습니다.
Product description
- Available in 2 power variants, 80mA and 15mA
- Industrial Ex d IIC Certified, Mining M1 Certified available for all variants
- SIL1 certification available for all variants
- All sensors carry a 5-year warranty
- Measures methane from 0 to 100% volume with a resolution of 0.01 % for 0-5% methane and 0.1% for 5-100% volume
- Multiple gas ranges enable the accurate detection of 0-100% vol. methane, 0-2% vol. propane and 0-100% vol. carbon dioxide with one sensor
- Measures carbon dioxide from 0 to 5% volume with a resolution of 0.01 % and 0.1% for 5-100% volume
- Configuration available specifically for biogas measurement
- Offers reduced response times when compared with earlier versions
- User configurable using USB powered Premier 4
- Configuration Unit
- Output can be scaled in % volume or % LEL
- Internal Flash memory allowing sensor firmware updates via configuration unit
- Enhanced EMC protection
- Infrared NDIR Sensor
Our Dual-Gas Methane (CH4) / Carbon Dioxide (CO2) sensors are revolutionary devices for the simultaneous measurement of Methane and Carbon Dioxide in a single sensor package. They acheive this whilst only consuming the power of a single infrared sensor. The sensors also have the additional benefit of a pre-characterised 0-2% Propane measurement range included as standard.
The sensors provide accurate measurement of gas levels using infrared gas sensing techniques. Various versions are available with combinations of ranges up to 100% volume Methane and 5% volume Carbon Dioxide. They consume the power of a single infrared sensor and therefore provide prolonged battery life when used within portable gas detectors.
The Hydrocarbon channel provides simultaneous readings for both High Resolution Methane and Propane.
Hydrocarbon Channel Resolution – 0.01% for range 0 to 10% Vol. and 0.1% for range 10% to 100% Vol. (CH4)
Carbon Dioxide Channel Resolution – 0.01% Vol. (CO2)
The sensors are part of the ‘Platinum’ Series and are available in Industrial Ex d IIC Certified, Mining M1 Certified and Non-Certified versions. They are also UL approved.
Low power and EN50271 / SIL1 certified software versions are also available in all combinations.
The ‘Premier’ Gas Sensor Configuration unit is for use with ‘Platinum’ Series sensors. It enables customisation of user definable parameters, data logging and calibration.