RFTM-PS-CO2-W LCD

S+S Regeltechnik

다측정 센서

제품 설명

 

  • 0…50 / 0…100 / 0…300 / 0…500 μg/m³
    0…2000 ppm / 0…5000 ppm
  • 온도, 상대습도, 미세먼지(PM), 이산화탄소(CO2)
  • 활성(0-10V/4…20mA), 전환 접점
  • 아이피 30
유지보수가 필요 없는 다기능 실내 온도 센서 AER ASGARD® RFTM – PS – CO2 – W는 액티브/스위칭 출력, 자동 보정 기능을 갖추고 있으며, 스냅온 뚜껑이 있는 매력적인 플라스틱 하우징에 들어 있으며, 하단에는 4개 구멍이 있는 마운팅이 있으며, 선택적으로 디스플레이가 있거나 없이 측정된 변수인 습도(0…100% RH), 온도(0…+50°C), 미세먼지(PM)(0…50/100/300/500μg/m³) 및 CO2 함량(0…2000/5000ppm)을 기록합니다. 측정 변환기는 측정된 변수를 0~10V 또는 4…20mA(전환 가능)의 표준 신호로 변환합니다.



전체 실내 온도를 단 하나의 장치로 효과적으로 모니터링하고 제어할 수 있습니다. 이를 통해 에너지 절약형, 필요에 따른 실내 환기가 가능해져 운영 비용이 절감되고 웰빙이 향상됩니다. 사무실, 호텔, 회의실, 아파트, 매장 등에서 사용됩니다. 장기간 안정적인 디지털 습도 및 온도 센서는 정확한 측정 결과를 보장합니다. 공기 중 CO2 농도는 광학 NDIR (비분산 적외선 기술) 센서를 통해 측정됩니다. 광학 입자 센서는 0.3~10마이크로미터 크기의 미세먼지(PM)를 정밀하게 감지합니다 . 센서는 공장에서 교정되며, 환경에 따라 전문가가 미세 조정을 할 수 있습니다.

Product description

 

  • 0…50 / 0…100 / 0…300 / 0…500 μg/m³
    0…2000 ppm / 0…5000 ppm
  • Temperature, relative humidity, particulate matter (PM), carbon dioxide (CO2)
  • active (0 -10 V / 4…20 mA), changeover contact
  • IP 30
Maintenance-free, multifunctional room climate sensor AERASGARD® RFTM – PS – CO2 – W with active/switching output, automatic calibration, in an attractive plastic housing with snap-on lid, lower part with 4-hole mounting, optionally with/without display, for recording the measured variables humidity (0…100 % RH), temperature (0…+50°C), particulate matter (PM) (0…50 / 100 / 300 / 500 μg/m³) and CO2 content (0…2000 / 5000 ppm). The measuring transducer converts the measured variable into a standard signal of 0-10 V or 4…20 mA (switchable).



The entire room climate can be effectively monitored and controlled with just one device. This enables energy-saving, needs-based room ventilation and thus a reduction in operating costs and an increase in well-being. It is used in offices, hotels, conference rooms, apartments, stores, etc. A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The CO2 content of the air is measured with an optical NDIR sensor (non-dispersive infrared technology). An optical particle sensor precisely detects particulate matter (PM) in the size category 0.3 to 10 micrometers. The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.
위로 스크롤