RTM-CO2-SD-U

S+S Regeltechnik

다측정 센서

제품 설명

  • 0…2000ppm
  • 온도, 이산화탄소(CO2)
  • 0~10V
  • 아이피 30
유지 보수가 필요 없는 실내 기후 센서 AER ASGARD® RFTM – CO2 – W/ RFTM – LQ – CO2 – W/ RTM – CO2 – SD 는 액티브/스위칭 출력, 자동 교정(끄기 가능), 스냅온 뚜껑이 있는 매력적인 플라스틱 하우징, 선택적으로 디스플레이 유무를 선택하여 공기의 CO2 함량(0…2000 ppm / 0…5000 ppm), 공기 질 또는 3가지 VOC 감도 수준(낮음/중간/높음)의 공기 질, 온도(0…+50°C) 및 상대 습도(0…100 % RH)를 측정합니다. 측정 변환기는 측정된 변수를 0~10V 또는 4…20 mA(전환 가능)의 표준 신호로 변환합니다.

이 센서는 사무실, 호텔, 회의실, 아파트, 매장 등에서 사용되며 실내 기후를 평가하는 데 사용됩니다. 이를 통해 에너지 절약형, 필요에 따른 실내 환기가 가능해져 운영 비용이 절감되고 웰빙이 향상됩니다.

장기간 안정적인 디지털 습도 및 온도 센서는 정확한 측정 결과를 보장합니다. CO2 측정은 광학 NDIR (비분산 적외선 기술) 센서를 사용하여 수행됩니다. 감지 범위는 주거 및 회의실 모니터링과 같은 표준 용도에 맞게 보정되었습니다. 공기 질은 VOC 센서 (휘발성 유기 물질용 혼합 가스 센서)를 사용하여 측정합니다. 이 센서는 담배 연기, 체액, 호흡 공기, 용매 증기, 건물 일부에서 발생하는 배출가스 등 오염된 가스에 의한 실내 공기 오염도를 측정합니다. 예상되는 공기 오염도에 따라 낮음, 중간 또는 높음의 VOC 감도를 설정할 수 있습니다.

Product description

  • 0…2000 ppm
  • Temperature, carbon dioxide (CO2)
  • 0 – 10 V
  • IP 30
Maintenance-free room climate sensor AERASGARD® RFTM – CO2 – W/ RFTM – LQ – CO2 – W/ RTM – CO2 – SD with active/switching output, automatic calibration (can be switched off), in an attractive plastic housing with snap-on lid, optionally with/without display, for determining the CO2 content of the air (0…2000 ppm / 0…5000 ppm), the air quality or air quality in three VOC sensitivity levels (low/medium/high), the temperature (0…+50°C) and the relative humidity (0…100 % RH). The measuring transducer converts the measured variables into a standard signal of 0-10 V or 4…20 mA (switchable).

The sensor is used in offices, hotels, conference rooms, apartments, stores, etc. and is used to evaluate the room climate. This enables energy-saving, needs-based room ventilation and thus a reduction in operating costs and an increase in well-being.

A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The CO2 measurement is carried out using an optical NDIR sensor (non-dispersive infrared technology). The detection range is calibrated for standard applications such as residential and conference room monitoring. The air quality is measured with a VOC sensor (mixed gas sensor for volatile organic substances). This determines the pollution of the room air by contaminated gases such as cigarette smoke, body vapors, breathing air, solvent vapors, emissions from parts of the building, etc. A low, medium or high VOC sensitivity can be set for the expected air contamination.
위로 스크롤